With over 20,000 devices deployed globally, the FLIR identiFINDER R400 is the most widely deployed handheld radionuclide identification device (RID) in the world. It is used to detect, locate, measure, and identify radioactive sources and produces rapid visible, audible, and tactile alerts that expedite response measures. The identiFINDER R400 provides operators the ideal balance of size and weight for a wide variety of monitoring scenarios including all-purpose surveying, emergency response, and environmental monitoring.
Detect, Locate, Measure, and Identify Radioactive Sources
GAMMA AND NEUTRON DETECTION
NaI detector enables rapid isotope identification (ANSI N42.34 library) for threat determination; GM detector provides dose rate and total dose
COMMON OPERATING INTERFACE
Large display provides visual alarm confirmation and ability to view advanced spectral data; self-explanatory buttons provide easy, one-handed operation
ADVANCED COMMUNICATIONS
Like other identiFINDER products, the R400 contains on-board Bluetooth, web server, and GPS technologies
SYSTEM OVERVIEW |
|
|---|---|
| Data Storage | 2GB internal memory; up to 600,000 spectra |
| Training Requirements | < 10 mins for operator; 1 day for advanced user |
ENVIRONMENTAL |
|
|---|---|
| Operating Humidity | 10 to 80%; |
| Operating Temperature | -4 to 122 °F(-20 to 50 °C) |
| Storage Temperature | 14 to 95 °F(-10 to 35 °C) |
OTHER |
|
|---|---|
| Global Positionsing System [GPS] [removable] | 12-channel SiRF III receiver |
PHYSICAL FEATURES |
|
|---|---|
| Dimensions (L x W x H) | ≤3.7 x 10.6 x 3.2 in (9.4 x 26.9 x 8.1 cm) -with battery |
| Weight | ≤3.2 lbs(≤1.5 kg) |
POWER |
|
|---|---|
| Battery Specs | Either rechargeable NiMH or 4x AA pack(supplied); ≥8h operational battery life; recharge ≤4h when using AC; recharge >4h when using USB |
| Cold Start Time | < 2 mins from cold start |
| Input Voltage | 100-240 VAC (wall and car adapters and USB cable supplied) |
SAMPLING & ANALYSIS |
|
|---|---|
| Nuclide Identification | According to ANSI N42.34 |
| Sample Introduction | Absorption of EM gamma or neutron emissions |
| Sampling & Analysis | From a few seconds to minutes |
| Threats | Detects neutron or gamma radiation emitted from natural occurrences in the environment, special nuclear material, industrial, or medical material |
SYSTEM INTERFACE |
|
|---|---|
| Software | On-board webserver software |
Title |
|
|---|---|
| Dose Range | 0 nSv - 1 Sv (0 nrem - 100 rem) |
| Dose Rate & Accuracy (Cs-137) | 0 nSv/h - 10.00mSv/h (0 nrem/h - 1.0 rem/h); ±30 % |
| Energy Range [Gamma] | 20 keV - 3 MeV |
| Gamma [High Dose Rate] | Geiger-Mller |
| Gamma LaBr3 | 1.2 x 1.2 in (30 x 30 mm) |
| Gamma Spectrum | 1024 channels; 3 MeV |
| Geiger-Muller Dose Rate Range | 100 µSv/h - 10mSv/h (10mrem/h - 1.0 rem/h) |
| Overload Dose Rate Range | 10 mSv/h - 1 Sv/h (1.0 rem/h - 100 rem/h) |
| Scintillator Dose Rate Range | 0 nSv/h - 500 µSv/h (0 nrem/h - 50mrem/h) |
| Service Interval | 5 year factorymaintenance |
| Stabilization | LED |
| Typical Resolution | 4.5 % FWHM at 662 keV |
Related documents
The information contained in this page pertains to a dual use product controlled for export by the Export Administration Regulations (EAR). Diversion contrary to US law is prohibited. US Department of Commerce authorization is not required prior to export or transfer to foreign persons or parties unless otherwise prohibited.
